| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is intended to provide compatibility with, and has been tested
against, legacy nanocat. There are a few differences though.
At this time support for the alias names (where argv[0] is set to
something like nngreq or somesuch) is missing.
By default this library operations without NNG_FLAG_NONBLOCK on
dial and listen, so that failures here are immediately diagnosable.
(This behavior can be changed with the --async flag.)
By default --pair means PAIRv1, but you can specify --pair0
or --pair1 explicitly. (There is also a --compat mode, and in
that mode --pair means PAIRv0. The --compat mode also turns on
NNG_FLAG_NONBLOCK by default.)
The "quoted" mode also quotes tabs. (Legacy nanocat did not.)
It is possible to connect to *multiple* peers by using the --dial
or --listen (or similar) options multiple times.
Shorthands can be used for long options that are not ambiguous. For
example, --surv can be used to mean surveyor, but --re is invalid because
it can mean req, rep, or respondent.
We assume you have a reasonable standard C environment. This won't work
in embedded environments without support for FILE *.
TLS options are missing but to be added soon.
A man page is still to be written.
|
| |
|
|
|
|
|
|
|
| |
These are incremental updates... we avoid using install() in the
subdirectories, so that we can adapt properly to them in the
single parent directory.
We have started some of the work to improve support for CPack. This
is still not yet done, but work in progress.
|
| |
|
|
|
|
|
| |
We enabled verbose compiler warnings, and found a lot of issues.
Some of these were even real bugs. As a bonus, we actually save
some initialization steps in the compat layer, and avoid passing
some variables we don't need.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This introduces enough of the HTTP API to support fully server
applications, including creation of websocket style protocols,
pluggable handlers, and so forth.
We have also introduced scatter/gather I/O (rudimentary) for
aios, and made other enhancements to the AIO framework. The
internals of the AIOs themselves are now fully private, and we
have eliminated the aio->a_addr member, with plans to remove the
pipe and possibly message members as well.
A few other minor issues were found and fixed as well.
The HTTP API includes request, response, and connection objects,
which can be used with both servers and clients. It also defines
the HTTP server and handler objects, which support server applications.
Support for client applications will require a client object to be
exposed, and that should be happening shortly.
None of this is "documented" yet, bug again, we will follow up shortly.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This introduces the wss:// scheme, which is available and works like
the ws:// scheme if TLS is enabled in the library.
The library modularization is refactored somewhat, to make it easier
to use. There is now a single NNG_ENABLE_TLS that enables TLS support
under the hood.
This also adds a new option for the TLS transport, NNG_OPT_TLS_CONFIG
(and a similar one for WSS, NNG_OPT_TLS_WSS_CONFIG) that offer access
to the underlying TLS configuration object, which now has a public API
to go with it as well.
Note that it is also possible to use pure HTTPS using the *private*
API, which will be exposed in a public form soon.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a rather large changeset -- it fundamentally adds websocket
transport, but as part of this changeset we added a generic framework
for both HTTP and websocket. We also made some supporting changes to
the core, such as changing the way timeouts work for AIOs and adding
additional state keeping for AIOs, and adding a common framework for
deferred finalization (to avoid certain kinds of circular deadlocks
during resource cleanup). We also invented a new initialization framework
so that we can avoid wiring in knowledge about them into the master
initialization framework.
The HTTP framework is not yet complete, but it is good enough for simple
static serving and building additional services on top of -- including
websocket. We expect both websocket and HTTP support to evolve
considerably, and so these are not part of the public API yet.
Property support for the websocket transport (in particular address
properties) is still missing, as is support for TLS.
The websocket transport here is a bit more robust than the original
nanomsg implementation, as it supports multiple sockets listening at
the same port sharing the same HTTP server instance, discriminating
between them based on URI (and possibly the virtual host).
Websocket is enabled by default at present, and work to conditionalize
HTTP and websocket further (to minimize bloat) is still pending.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This introduces a new transport (compatible with the TLS
transport from mangos), using TLS v1.2.
To use the new transport, you must have the mbed TLS library
available on your system (Xenial libmbedtls-dev). You can use
version 2.x or newer -- 1.3.x and PolarSSL versions are not
supported.
You enable the TLS transport with -DNNG_TRANSPORT_TLS=ON in the CMake
configuration.
You must configure the server certificate by default, and this can only
be done using nng options. See the nng_tls man page for details.
This work is experimental, and was made possible by Capitar IT Group BV,
and Staysail Systems, Inc.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes all the protocols and transports optional. All
of them except ZeroTier are enabled by default, but you can
now disable them (remove from the build) with cmake options.
The test suite is modified so that tests still run as much
as they can, but skip over things caused by missing functionality
from the library (due to configuration).
Further, the constant definitions and prototypes for functions
that are specific to transports or protocols are moved into
appropriate headers, which should be included directly by
applications wishing to use these.
We have also added and improved documentation -- all of the
transports are documented, and several more man pages for
protocols have been added. (Req/Rep and Surveyor are still
missing.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The ZeroTier transport is experimental at this point, and not enabled
by default. It does not work with Windows yet (the Windows platform
needs UDP support first.)
Configure with -DNNG_ENABLE_ZEROTIER=yes -DNNG_ZEROTIER_SOUCE=<path>
The <path> must point to a dev branch of the ZeroTierOne source tree,
checked out, and built with a libzerotiercore.a in the top directory,
and a ZeroTierOne.h header located at include. The build will add
-lc++ to the compile, as the ZeroTier core functionality is written in
C++ and needs some runtime support (e.g. new, delete, etc.)
|
| |
|
|
|
|
| |
We fixed up the coverage flags for GNU C, but are not going to run
the C++ tests when doing coverage (they fail linking gcov for reasons
unknown.)
|
| |
|
|
| |
More string safety for stuff coming from externals.
|
| |
|
|
|
|
|
|
| |
We have our versions of strdup, strlcat, and strlcpy.
This means we can avoid using snprintf() in many cases
(saving cycles), and we can get safer checks. We use
the platform supplied versions of these if they exist
(wrapping with nni_xxx versions.)
|
| |
|
|
|
|
|
|
|
|
| |
We only compile files that are appropriate for the platform. (We
still have guards in place, to allow for a future single .C file
to be built from all the sources.) We also remove the subsystem defines;
if a new platform needs to deviate from POSIX in ways beyond what we
intended here, then that platform should just copy those parts into
a new platform directory, rather than cross including portions from
POSIX.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
We use codecov.io; this seems to work well.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
Also, while here fixed a bug for the PAIR protocol in compat mode.
It should now be possible to import more of the nanomsg tests directly
with little or no modification.
|
| | |
|
| | |
|
| |
|
|
|
| |
Test code needs to use the static libraries so that they can get access
to the entire set of symbols, including private ones that are not exported.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
