| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fixes #360 core should nng_aio_begin before nng_aio_finish_error
fixes #361 nng_send_aio should check for NULL message
fixes #362 nni_msgq does not signal pollable on certain events
This adds support for contexts for both sides of the surveyor pattern.
Prior to this commit, the raw mode was completely broken, and there
were numerous other bugs found and fixed. This integration includes
*much* deeper validation of this pattern.
Some changes to the core and other patterns have been made, where it
was obvioius that we could make such improvements. (The obviousness
stemming from the fact that RESPONDENT in particular is very closely
derived from REP.)
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This provides context support for REQ and REP sockets.
More discussion around this is in the issue itself.
Optionally we would like to extend this to the surveyor pattern.
Note that we specifically do not support pollable descriptors
for non-default contexts, and the results of using file descriptors
for polling (NNG_OPT_SENDFD and NNG_OPT_RECVFD) is undefined.
In the future, it might be nice to figure out how to factor in
optional use of a message queue for users who want more buffering,
but we think there is little need for this with cooked mode.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
fixes #302 nng_dialer/listener/pipe_getopt_sockaddr desired
This adds plumbing to pass and check the type of options
all the way through.
NNG_ZT_OPT_ORBIT is type UINT64, but you can use the untyped form to
pass two of them if needed.
No typed access for retrieving strings yet. I think this should allocate
a pointer and copy that out, but that's for later.
|
| |
|
|
|
|
|
| |
on a python wrapper (cffi).
Mostly this is fixing inconsistencies in our public API and the actual
implementation.
|
| |
|
|
|
|
|
|
|
|
|
| |
fixes #275 nng_pipe_getopt_ptr() missing?
fixes #285 nng_setopt_ptr MIS
fixes #297 nng_listener/dialer_close does not validate mode
This change adds some missing APIs, and changes others.
In particular, certain options are now of type bool, with size
of just one. This is a *breaking* change for code that uses those
options -- NNG_OPT_RAW, NNG_OPT_PAIR1_POLY, NNG_OPT_TLS_VERIFIED.
|
| | |
|
| |
|
|
|
|
| |
We only add a basic --version (also -V). I'm still trying to figure
out how to convince cmake to emit its compilation flags into a file
where we can use them for output.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is intended to provide compatibility with, and has been tested
against, legacy nanocat. There are a few differences though.
At this time support for the alias names (where argv[0] is set to
something like nngreq or somesuch) is missing.
By default this library operations without NNG_FLAG_NONBLOCK on
dial and listen, so that failures here are immediately diagnosable.
(This behavior can be changed with the --async flag.)
By default --pair means PAIRv1, but you can specify --pair0
or --pair1 explicitly. (There is also a --compat mode, and in
that mode --pair means PAIRv0. The --compat mode also turns on
NNG_FLAG_NONBLOCK by default.)
The "quoted" mode also quotes tabs. (Legacy nanocat did not.)
It is possible to connect to *multiple* peers by using the --dial
or --listen (or similar) options multiple times.
Shorthands can be used for long options that are not ambiguous. For
example, --surv can be used to mean surveyor, but --re is invalid because
it can mean req, rep, or respondent.
We assume you have a reasonable standard C environment. This won't work
in embedded environments without support for FILE *.
TLS options are missing but to be added soon.
A man page is still to be written.
|
| |
|
|
|
|
| |
We move the HTTP definitions out of the core nng.h and into
a supplemental header. Most of this change was trivial updates
to all of the HTTP related manual pages.
|
| |
|
|
|
|
|
| |
This introduces portable primitives for time, random numbers,
synchronization primitives, and threading. These are somewhat
primitive (least common denominiators), but they can help with writing
portable applications, especially our own demo apps.
|
| |
|
|
|
|
|
|
| |
This addresses the use of the pipe special field, and eliminates it.
The message APIs (recvmsg, sendmsg) need to be updated as well still,
but I want to handle that as part of a separate issue.
While here we fixed various compiler warnings, etc.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This introduces enough of the HTTP API to support fully server
applications, including creation of websocket style protocols,
pluggable handlers, and so forth.
We have also introduced scatter/gather I/O (rudimentary) for
aios, and made other enhancements to the AIO framework. The
internals of the AIOs themselves are now fully private, and we
have eliminated the aio->a_addr member, with plans to remove the
pipe and possibly message members as well.
A few other minor issues were found and fixed as well.
The HTTP API includes request, response, and connection objects,
which can be used with both servers and clients. It also defines
the HTTP server and handler objects, which support server applications.
Support for client applications will require a client object to be
exposed, and that should be happening shortly.
None of this is "documented" yet, bug again, we will follow up shortly.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support for configuration of TLS websockets using the files
for keys, certificates, and CRLs. Significant changes to the websocket,
TLS, and HTTP layers were made here. We now expect TLS configuration to
be tied to the HTTP layer, and the HTTP code creates default configuration
objects based on the URL supplied. (HTTP dialers and listeners are now
created with a URL rather than a sockaddr, giving them access to the scheme
as well.)
We fixed several bugs affecting TLS validation, and added a test suite
that confirms that validation works as it should. We also fixed an orphaned
socket during HTTP negotiation, responsible for an occasional assertion
error if the http handshake does not complete successfully. Finally several
use-after-free races were closed.
TLS layer changes include reporting of handshake failures using newly
created "standard" error codes for peer authentication and cryptographic
failures.
The use of the '*' wild card in URLs at bind time is no longer supported
for websocket at least.
Documentation updates for all this are in place as well.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This introduces the wss:// scheme, which is available and works like
the ws:// scheme if TLS is enabled in the library.
The library modularization is refactored somewhat, to make it easier
to use. There is now a single NNG_ENABLE_TLS that enables TLS support
under the hood.
This also adds a new option for the TLS transport, NNG_OPT_TLS_CONFIG
(and a similar one for WSS, NNG_OPT_TLS_WSS_CONFIG) that offer access
to the underlying TLS configuration object, which now has a public API
to go with it as well.
Note that it is also possible to use pure HTTPS using the *private*
API, which will be exposed in a public form soon.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a rather large changeset -- it fundamentally adds websocket
transport, but as part of this changeset we added a generic framework
for both HTTP and websocket. We also made some supporting changes to
the core, such as changing the way timeouts work for AIOs and adding
additional state keeping for AIOs, and adding a common framework for
deferred finalization (to avoid certain kinds of circular deadlocks
during resource cleanup). We also invented a new initialization framework
so that we can avoid wiring in knowledge about them into the master
initialization framework.
The HTTP framework is not yet complete, but it is good enough for simple
static serving and building additional services on top of -- including
websocket. We expect both websocket and HTTP support to evolve
considerably, and so these are not part of the public API yet.
Property support for the websocket transport (in particular address
properties) is still missing, as is support for TLS.
The websocket transport here is a bit more robust than the original
nanomsg implementation, as it supports multiple sockets listening at
the same port sharing the same HTTP server instance, discriminating
between them based on URI (and possibly the virtual host).
Websocket is enabled by default at present, and work to conditionalize
HTTP and websocket further (to minimize bloat) is still pending.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
This eliminates the separate threads used for devices, letting them
benefit from the new aio framework. It also eliminates the legacy
nni_sock_sendmsg and nni_sock_recvmsg internal APIs.
It would appear that there is an opportunity here to provide asynchronous
device support out to userland as well, exposing an aio to them. That
work is deferred to later.
|
| |
|
|
|
|
|
|
|
|
| |
While here we added a test for the aio stuff, and cleaned up some dead
code for the old fd notifications. There were a few improvements to
shorten & clean code elsewhere, such as short-circuiting task wait
when the task has no callback.
The legacy sendmsg() and recvmsg() APIs are still in the socket core
until we convert the device code to use the aios.
|
| |
|
|
|
|
|
|
|
| |
This eliminates the "quasi-functional" notify API altogether.
The aio framework will be coming soon to replace it.
As a bonus, apps (legacy apps) that use the notification FDs
will see improved performance, since we don't have to context
switch to give them a notification.
|
| | |
|
| |
|
|
|
|
| |
There is now a public nng_duration type. We have also updated the
zerotier work to work with the signed int64_t's that the latst ZeroTier
dev branch is using.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We allow some properties to be set on endpoints after they are
started; transports now responsible for checking that. (The new
values will only apply to new connections of course!)
We added short-hand functions for pipe properties, and also added
uint64_t shorthands across the board.
The zerotier documentation got some updates (corrections). We have
also added a separate header now for the ZT stuff.
Also, dialers and listeners do not intermix anymore -- we test that
only a dialer can be used with setting dialer options, and likewise
for listeners.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This makes the APIs use string keys, and largely eliminates the use of
integer option IDs altogether. The underlying registration for options
is also now a bit richer, letting protcols and transports declare the
actual options they use, rather than calling down into each entry point
carte blanche and relying on ENOTSUP.
This code may not be as fast as the integers was, but it is more intuitive,
easier to extend, and is not on any hot code paths. (If you're diddling
options on a hot code path you're doing something wrong.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The ZeroTier transport is experimental at this point, and not enabled
by default. It does not work with Windows yet (the Windows platform
needs UDP support first.)
Configure with -DNNG_ENABLE_ZEROTIER=yes -DNNG_ZEROTIER_SOUCE=<path>
The <path> must point to a dev branch of the ZeroTierOne source tree,
checked out, and built with a libzerotiercore.a in the top directory,
and a ZeroTierOne.h header located at include. The build will add
-lc++ to the compile, as the ZeroTier core functionality is written in
C++ and needs some runtime support (e.g. new, delete, etc.)
|
| |
|
|
|
|
|
|
|
|
| |
This fleshes most of the pipe API out, making it available to end user
code. It also adds a URL option that is independent of the address
options (which would be sockaddrs.)
Also, we are now setting the pipe for req/rep. The other protocols need
to have the same logic added to set the receive pipe on the message. (Pair
is already done.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This eliminates all the old #define's or enum values, making all
option IDs now totally dynamic, and providing well-known string
values for well-behaved applications.
We have added tests of some of these options, including lookups, and
so forth. We have also fixed a few problems; including at least
one crasher bug when the timeouts on reconnect were zero.
Protocol specific options are now handled in the protocol. We will
be moving the initialization for a few of those well known entities
to the protocol startup code, following the PAIRv1 pattern, later.
Applications must therefore not depend on the value of the integer IDs,
at least until the application has opened a socket of the appropriate
type.
|
| |
|
|
|
|
|
| |
This permits option numbers to be allocated based on string name.
Eventually all the option values will be replaced with option
names. This will facilitate transports (ZeroTier) that may need
further options.
|
| | |
|
| |
|
|
|
|
| |
This supports creating listeners and dialers, managing options
on them (though only a few options are supported at present),
starting them and closing them, all independently.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the underlying platform fails (FreeBSD is the only one I'm aware
of that does this!), we use a global lock or condition variable instead.
This means that our lock initializers never ever fail.
Probably we could eliminate most of this for Linux and Darwin, since
on those platforms, mutex and condvar initialization reasonably never
fails. Initial benchmarks show little difference either way -- so we
can revisit (optimize) later.
This removes a lot of otherwise untested code in error cases and so forth,
improving coverage and resilience in the face of allocation failures.
Platforms other than POSIX should follow a similar pattern if they need
this. (VxWorks, I'm thinking of you.) Most sane platforms won't have
an issue here, since normally these initializations do not need to allocate
memory. (Reportedly, even FreeBSD has plans to "fix" this in libthr2.)
While here, some bugs were fixed in initialization & teardown.
The fallback code is properly tested with dedicated test cases.
|
| |
|
|
|
| |
We enable a few flags, but now the details of the socket internals
are completely private to the socket.
|
| | |
|
| |
|
|
|
| |
Also enables creating endpoints that are idle (first part of
endpoint options API) and shutting down endpoints.
|
| |
|
|
|
|
|
|
|
|
|
| |
fixes #66 Make pipe and endpoint structures private
This changes a number of things, refactoring endpoints and supporting
code to keep their internals private, and making endpoint close
synchronous. This will allow us to add a consumer facing API for
nng_ep_close(), as well as property APIs, etc.
While here a bunch of convoluted and dead code was cleaned up.
|
| |
|
|
|
|
|
|
| |
This adds functions that know about option sizes and make them
easier to use. While here I added some validation of those, and
cleaned up a few tests slightly. Note that we do not need to
use the nng_impl.h for most tests. More of them need to be
cleaned up.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This makes the operations that work on headers start with
nni_msg_header or nng_msg_header. It also renames _trunc to
_chop (same strlen as _trim), and renames prepend to insert.
We add a shorthand for clearing message content, and make
better use of the endian safe 32-bit accessors too.
This also fixes a bug in inserting large headers into messages.
A test suite for message handling is included.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
fixes #38 Make protocols "pluggable", or at least optional
This is a breaking change, as we've done away with the central
registered list of protocols, and instead demand the user call
nng_xxx_open() where xxx is a protocol name. (We did keep a
table around in the compat framework though.)
There is a nice way for protocols to plug in via
an nni_proto_open(), where they can use a generic constructor
that they use to build a protocol specific constructor (passing
their ops vector in.)
|
