nng_tls_config_auth_mode(3)
===========================
:doctype: manpage
:manmanual: nng
:mansource: nng
:manvolnum: 3
:icons: font
:source-highlighter: pygments
:copyright: Copyright 2018 Staysail Systems, Inc. <info@staysail.tech> \
            Copyright 2018 Capitar IT Group BV <info@capitar.com> \
            This software is supplied under the terms of the MIT License, a \
            copy of which should be located in the distribution where this \
            file was obtained (LICENSE.txt).  A copy of the license may also \
            be found online at https://opensource.org/licenses/MIT.

NAME
----
nng_tls_config_auth_mode - configure authentication mode

SYNOPSIS
--------

[source, c]
-----------
#include <nng/nng.h>

typedef enum nng_tls_auth_mode {
        NNG_TLS_AUTH_MODE_NONE,
        NNG_TLS_AUTH_MODE_OPTIONAL,
        NNG_TLS_AUTH_MODE_REQUIRED
} nng_tls_auth_mode;

int nng_tls_config_auth_mode(nni_tls_config *cfg, nng_tls_auth_mode mode);
-----------

DESCRIPTION
-----------

The `nng_tls_config_auth_mode()` function configures the authentication mode
to be used for TLS sessions using this configuration object.

The possible modes are:

`NNG_TLS_AUTH_MODE_NONE`::
No authentication of the TLS peer is performed.  This is the default for
TLS servers, which most typically do not authenticate their clients.

`NNG_TLS_AUTH_MODE_OPTIONAL`::
If a certificate is presented by the peer, then it is validated.  However,
if the peer does not present a valid certificate, then the sesssion is allowed
to proceed without authentication.

`NNG_TLS_AUTH_MODE_REQUIRED`::
A check is made to ensure that the peer has presented a valid certificate
used for the session.  If the peer's certificate is invalid or missing, then
the session is refused.  This is the default for clients.

RETURN VALUES
-------------

This function returns 0 on success, and non-zero otherwise.

ERRORS
------

`NNG_ENOMEM`:: Insufficient memory is available.
`NNG_EINVAL`:: An invalid 'mode' was specified.
`NNG_EBUSY`:: The configuration 'cfg' is already in use, and cannot be modified.


SEE ALSO
--------

<<nng_strerror#,nng_strerror(3)>>,
<<nng_tls_config_alloc#,nng_tls_config_alloc(3)>>,
<<nng_tls_config_ca_chain#,nng_tls_config_ca_chain(3)>>,
<<nng_tls_config_ca_file#,nng_tls_config_ca_file(3)>>,
<<nng_tls_config_server_name#,nng_tls_config_server_name(3)>>,
<<nng#,nng(7)>>


COPYRIGHT
---------

Copyright 2018 mailto:info@staysail.tech[Staysail Systems, Inc.] +
Copyright 2018 mailto:info@capitar.com[Capitar IT Group BV]

This document is supplied under the terms of the
https://opensource.org/licenses/MIT[MIT License].