Remove the libnanomsg compatibility layer

1 files changed, 0 insertions, 153 deletions

diff --git a/tests/compat_reqttl.c b/tests/compat_reqttl.c
deleted file mode 100644
index 939ca567..00000000
--- a/tests/compat_reqttl.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
-    Copyright (c) 2012 Martin Sustrik  All rights reserved.
-    Copyright (c) 2013 GoPivotal, Inc.  All rights reserved.
-    Copyright 2016 Franklin "Snaipe" Mathieu <franklinmathieu@gmail.com>
-    Copyright 2018 Garrett D'Amore <garrett@damore.org>
-
-    Permission is hereby granted, free of charge, to any person obtaining a copy
-    of this software and associated documentation files (the "Software"),
-    to deal in the Software without restriction, including without limitation
-    the rights to use, copy, modify, merge, publish, distribute, sublicense,
-    and/or sell copies of the Software, and to permit persons to whom
-    the Software is furnished to do so, subject to the following conditions:
-
-    The above copyright notice and this permission notice shall be included
-    in all copies or substantial portions of the Software.
-
-    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-    IN THE SOFTWARE.
-*/
-
-#include <nng/compat/nanomsg/nn.h>
-#include <nng/compat/nanomsg/reqrep.h>
-#include <nng/compat/nanomsg/tcp.h>
-
-#include "compat_testutil.h"
-
-static char socket_address_a[128];
-static char socket_address_b[128];
-int dev0;
-int dev1;
-
-void device (NN_UNUSED void *arg)
-{
-    int rc;
-
-    /*  Run the device. */
-    rc = nn_device (dev0, dev1);
-    nn_assert (rc < 0 && nn_errno () == EBADF);
-
-    /*  Clean up. */
-    nn_close (dev0);
-    nn_close (dev1);
-}
-
-int main (int argc, const char *argv[])
-{
-    int end0;
-    int end1;
-    struct nn_thread thread1;
-    int timeo;
-    int maxttl;
-    size_t sz;
-    int rc;
-
-    int port = get_test_port(argc, argv);
-
-    test_addr_from(socket_address_a, "tcp", "127.0.0.1", port);
-    test_addr_from(socket_address_b, "tcp", "127.0.0.1", port + 1);
-
-    /*  Intialise the device sockets. */
-    dev0 = test_socket (AF_SP_RAW, NN_REP);
-    dev1 = test_socket (AF_SP_RAW, NN_REQ);
-
-    test_bind (dev0, socket_address_a);
-    test_bind (dev1, socket_address_b);
-
-    /*  Start the device. */
-    nn_thread_init (&thread1, device, NULL);
-
-    end0 = test_socket (AF_SP, NN_REQ);
-    end1 = test_socket (AF_SP, NN_REP);
-
-    /*  Test the bi-directional device TTL */ 
-    test_connect (end0, socket_address_a);
-    test_connect (end1, socket_address_b);
-
-    /*  Wait for TCP to establish. */
-    nn_sleep (100);
-
-    /*  Pass a message between endpoints. */
-    /*  Set up max receive timeout. */
-    timeo = 100;
-    test_setsockopt (end0, NN_SOL_SOCKET, NN_RCVTIMEO, &timeo, sizeof (timeo));
-    timeo = 100;
-    test_setsockopt (end1, NN_SOL_SOCKET, NN_RCVTIMEO, &timeo, sizeof (timeo));
-
-    /*  Test default TTL is 8. */
-    sz = sizeof (maxttl);
-    maxttl = -1;
-    rc = nn_getsockopt(end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, &sz);
-    nn_assert (rc == 0);
-    nn_assert (sz == sizeof (maxttl));
-    nn_assert (maxttl == 8);
-
-    /*  Test to make sure option TTL cannot be set below 1. */
-    maxttl = -1;
-    rc = nn_setsockopt(end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-    nn_assert (rc < 0 && nn_errno () == EINVAL);
-    nn_assert (maxttl == -1);
-    maxttl = 0;
-    rc = nn_setsockopt(end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-    nn_assert (rc < 0 && nn_errno () == EINVAL);
-    nn_assert (maxttl == 0);
-
-    /*  Test to set non-integer size */
-    maxttl = 8;
-    rc = nn_setsockopt(end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, 1);
-    nn_assert (rc < 0 && nn_errno () == EINVAL);
-    nn_assert (maxttl == 8);
-
-    test_send (end0, "XYZ");
-
-    test_recv (end1, "XYZ");
-
-    /*  Now send a reply. */
-    test_send (end1, "REPLYXYZ\n");
-    test_recv (end0, "REPLYXYZ\n");
-
-    /*  Now set the max TTL. */
-    maxttl = 1;
-    test_setsockopt (end0, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-    test_setsockopt (end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-
-    test_send (end0, "DROPTHIS");
-    test_drop (end1, ETIMEDOUT);
-
-    /*  Now set the max TTL up. */
-    maxttl = 2;
-    test_setsockopt (end0, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-    test_setsockopt (end1, NN_SOL_SOCKET, NN_MAXTTL, &maxttl, sizeof (maxttl));
-
-    test_send (end0, "DONTDROP");
-    test_recv (end1, "DONTDROP");
-
-   test_send (end1, "GOTIT");
-   test_recv (end0, "GOTIT");
-
-    /*  Clean up. */
-    test_close (end0);
-    test_close (end1);
-
-    /*  Shut down the devices. */
-    nn_term ();
-
-    nn_thread_term (&thread1);
-
-    return 0;
-}