1 files changed, 0 insertions, 442 deletions
diff --git a/src/protocol/pipeline0/push.c b/src/protocol/pipeline0/push.c
deleted file mode 100644
index ad43d967..00000000
--- a/src/protocol/pipeline0/push.c
+++ /dev/null
@@ -1,442 +0,0 @@
-//
-// Copyright 2020 Staysail Systems, Inc. <info@staysail.tech>
-// Copyright 2018 Capitar IT Group BV <info@capitar.com>
-//
-// This software is supplied under the terms of the MIT License, a
-// copy of which should be located in the distribution where this
-// file was obtained (LICENSE.txt).  A copy of the license may also be
-// found online at https://opensource.org/licenses/MIT.
-//
-
-#include <stdlib.h>
-
-#include "core/nng_impl.h"
-#include "nng/protocol/pipeline0/push.h"
-
-// Push protocol.  The PUSH protocol is the "write" side of a pipeline.
-// Push distributes fairly, or tries to, by giving messages in round-robin
-// order.
-
-#ifndef NNI_PROTO_PULL_V0
-#define NNI_PROTO_PULL_V0 NNI_PROTO(5, 1)
-#endif
-
-#ifndef NNI_PROTO_PUSH_V0
-#define NNI_PROTO_PUSH_V0 NNI_PROTO(5, 0)
-#endif
-
-typedef struct push0_pipe push0_pipe;
-typedef struct push0_sock push0_sock;
-
-static void push0_send_cb(void *);
-static void push0_recv_cb(void *);
-static void push0_pipe_ready(push0_pipe *);
-
-// push0_sock is our per-socket protocol private structure.
-struct push0_sock {
-	nni_lmq      wq; // list of messages queued
-	nni_list     aq; // list of aio senders waiting
-	nni_list     pl; // list of pipes ready to send
-	nni_pollable writable;
-	nni_mtx      m;
-};
-
-// push0_pipe is our per-pipe protocol private structure.
-struct push0_pipe {
-	nni_pipe *    pipe;
-	push0_sock *  push;
-	nni_list_node node;
-
-	nni_aio aio_recv;
-	nni_aio aio_send;
-};
-
-static int
-push0_sock_init(void *arg, nni_sock *sock)
-{
-	push0_sock *s = arg;
-	NNI_ARG_UNUSED(sock);
-
-	nni_mtx_init(&s->m);
-	nni_aio_list_init(&s->aq);
-	NNI_LIST_INIT(&s->pl, push0_pipe, node);
-	nni_lmq_init(&s->wq, 0); // initially we start unbuffered.
-	nni_pollable_init(&s->writable);
-
-	return (0);
-}
-
-static void
-push0_sock_fini(void *arg)
-{
-	push0_sock *s = arg;
-	nni_pollable_fini(&s->writable);
-	nni_lmq_fini(&s->wq);
-	nni_mtx_fini(&s->m);
-}
-
-static void
-push0_sock_open(void *arg)
-{
-	NNI_ARG_UNUSED(arg);
-}
-
-static void
-push0_sock_close(void *arg)
-{
-	push0_sock *s = arg;
-	nni_aio *   a;
-	nni_mtx_lock(&s->m);
-	while ((a = nni_list_first(&s->aq)) != NULL) {
-		nni_aio_list_remove(a);
-		nni_aio_finish_error(a, NNG_ECLOSED);
-	}
-	nni_mtx_unlock(&s->m);
-}
-
-static void
-push0_pipe_stop(void *arg)
-{
-	push0_pipe *p = arg;
-
-	nni_aio_stop(&p->aio_recv);
-	nni_aio_stop(&p->aio_send);
-}
-
-static void
-push0_pipe_fini(void *arg)
-{
-	push0_pipe *p = arg;
-
-	nni_aio_fini(&p->aio_recv);
-	nni_aio_fini(&p->aio_send);
-}
-
-static int
-push0_pipe_init(void *arg, nni_pipe *pipe, void *s)
-{
-	push0_pipe *p = arg;
-
-	nni_aio_init(&p->aio_recv, push0_recv_cb, p);
-	nni_aio_init(&p->aio_send, push0_send_cb, p);
-	NNI_LIST_NODE_INIT(&p->node);
-	p->pipe = pipe;
-	p->push = s;
-	return (0);
-}
-
-static int
-push0_pipe_start(void *arg)
-{
-	push0_pipe *p = arg;
-
-	if (nni_pipe_peer(p->pipe) != NNI_PROTO_PULL_V0) {
-		return (NNG_EPROTO);
-	}
-
-	// Schedule a receiver.  This is mostly so that we can detect
-	// a closed transport pipe.
-	nni_pipe_recv(p->pipe, &p->aio_recv);
-	push0_pipe_ready(p);
-
-	return (0);
-}
-
-static void
-push0_pipe_close(void *arg)
-{
-	push0_pipe *p = arg;
-	push0_sock *s = p->push;
-
-	nni_aio_close(&p->aio_recv);
-	nni_aio_close(&p->aio_send);
-
-	nni_mtx_lock(&s->m);
-	if (nni_list_node_active(&p->node)) {
-		nni_list_node_remove(&p->node);
-
-		if (nni_list_empty(&s->pl) && nni_lmq_full(&s->wq)) {
-			nni_pollable_clear(&s->writable);
-		}
-	}
-	nni_mtx_unlock(&s->m);
-}
-
-static void
-push0_recv_cb(void *arg)
-{
-	push0_pipe *p = arg;
-
-	// We normally expect to receive an error.  If a pipe actually
-	// sends us data, we just discard it.
-	if (nni_aio_result(&p->aio_recv) != 0) {
-		nni_pipe_close(p->pipe);
-		return;
-	}
-	nni_msg_free(nni_aio_get_msg(&p->aio_recv));
-	nni_aio_set_msg(&p->aio_recv, NULL);
-	nni_pipe_recv(p->pipe, &p->aio_recv);
-}
-
-static void
-push0_pipe_ready(push0_pipe *p)
-{
-	push0_sock *s = p->push;
-	nni_msg *   m;
-	nni_aio *   a = NULL;
-	size_t      l;
-	bool        blocked;
-
-	nni_mtx_lock(&s->m);
-
-	blocked = nni_lmq_full(&s->wq) && nni_list_empty(&s->pl);
-
-	// if  message is waiting in the buffered queue
-	// then we prefer that.
-	if (nni_lmq_getq(&s->wq, &m) == 0) {
-		nni_aio_set_msg(&p->aio_send, m);
-		nni_pipe_send(p->pipe, &p->aio_send);
-
-		if ((a = nni_list_first(&s->aq)) != NULL) {
-			nni_aio_list_remove(a);
-			m = nni_aio_get_msg(a);
-			l = nni_msg_len(m);
-			nni_lmq_putq(&s->wq, m);
-		}
-
-	} else if ((a = nni_list_first(&s->aq)) != NULL) {
-		// Looks like we had the unbuffered case, but
-		// someone was waiting.
-		nni_aio_list_remove(a);
-		m = nni_aio_get_msg(a);
-		l = nni_msg_len(m);
-
-		nni_aio_set_msg(&p->aio_send, m);
-		nni_pipe_send(p->pipe, &p->aio_send);
-	} else {
-		// We had nothing to send.  Just put us in the ready list.
-		nni_list_append(&s->pl, p);
-	}
-
-	if (blocked) {
-		// if we blocked, then toggle the status.
-		if ((!nni_lmq_full(&s->wq)) || (!nni_list_empty(&s->pl))) {
-			nni_pollable_raise(&s->writable);
-		}
-	}
-
-	nni_mtx_unlock(&s->m);
-
-	if (a != NULL) {
-		nni_aio_set_msg(a, NULL);
-		nni_aio_finish_sync(a, 0, l);
-	}
-}
-
-static void
-push0_send_cb(void *arg)
-{
-	push0_pipe *p = arg;
-
-	if (nni_aio_result(&p->aio_send) != 0) {
-		nni_msg_free(nni_aio_get_msg(&p->aio_send));
-		nni_aio_set_msg(&p->aio_send, NULL);
-		nni_pipe_close(p->pipe);
-		return;
-	}
-
-	push0_pipe_ready(p);
-}
-
-static void
-push0_cancel(nni_aio *aio, void *arg, int rv)
-{
-	push0_sock *s = arg;
-
-	nni_mtx_lock(&s->m);
-	if (nni_aio_list_active(aio)) {
-		nni_aio_list_remove(aio);
-		nni_aio_finish_error(aio, rv);
-	}
-	nni_mtx_unlock(&s->m);
-}
-
-static void
-push0_sock_send(void *arg, nni_aio *aio)
-{
-	push0_sock *s = arg;
-	push0_pipe *p;
-	nni_msg *   m;
-	size_t      l;
-	int         rv;
-
-	if (nni_aio_begin(aio) != 0) {
-		return;
-	}
-
-	m = nni_aio_get_msg(aio);
-	l = nni_msg_len(m);
-
-	nni_mtx_lock(&s->m);
-
-	// First we want to see if we can send it right now.
-	// Note that we don't block the sender until the read is complete,
-	// only until we have committed to send it.
-	if ((p = nni_list_first(&s->pl)) != NULL) {
-		nni_list_remove(&s->pl, p);
-		// NB: We won't have had any waiters in the message queue
-		// or the aio queue, because we would not put the pipe
-		// in the ready list in that case.  Note though that the
-		// wq may be "full" if we are unbuffered.
-		if (nni_list_empty(&s->pl) && (nni_lmq_full(&s->wq))) {
-			nni_pollable_clear(&s->writable);
-		}
-		nni_aio_set_msg(aio, NULL);
-		nni_aio_finish(aio, 0, l);
-		nni_aio_set_msg(&p->aio_send, m);
-		nni_pipe_send(p->pipe, &p->aio_send);
-		nni_mtx_unlock(&s->m);
-		return;
-	}
-
-	// Can we maybe queue it.
-	if (nni_lmq_putq(&s->wq, m) == 0) {
-		// Yay, we can.  So we're done.
-		nni_aio_set_msg(aio, NULL);
-		nni_aio_finish(aio, 0, l);
-		if (nni_lmq_full(&s->wq)) {
-			nni_pollable_clear(&s->writable);
-		}
-		nni_mtx_unlock(&s->m);
-		return;
-	}
-
-	if ((rv = nni_aio_schedule(aio, push0_cancel, s)) != 0) {
-		nni_aio_finish_error(aio, rv);
-		nni_mtx_unlock(&s->m);
-		return;
-	}
-	nni_aio_list_append(&s->aq, aio);
-	nni_mtx_unlock(&s->m);
-}
-
-static void
-push0_sock_recv(void *arg, nni_aio *aio)
-{
-	NNI_ARG_UNUSED(arg);
-	nni_aio_finish_error(aio, NNG_ENOTSUP);
-}
-
-static int
-push0_set_send_buf_len(void *arg, const void *buf, size_t sz, nni_type t)
-{
-	push0_sock *s = arg;
-	int         val;
-	int         rv;
-
-	if ((rv = nni_copyin_int(&val, buf, sz, 0, 8192, t)) != 0) {
-		return (rv);
-	}
-	nni_mtx_lock(&s->m);
-	rv = nni_lmq_resize(&s->wq, (size_t) val);
-	// Changing the size of the queue can affect our readiness.
-	if (!nni_lmq_full(&s->wq)) {
-		nni_pollable_raise(&s->writable);
-	} else if (nni_list_empty(&s->pl)) {
-		nni_pollable_clear(&s->writable);
-	}
-	nni_mtx_unlock(&s->m);
-	return (rv);
-}
-
-static int
-push0_get_send_buf_len(void *arg, void *buf, size_t *szp, nni_opt_type t)
-{
-	push0_sock *s = arg;
-	int         val;
-
-	nni_mtx_lock(&s->m);
-	val = nni_lmq_cap(&s->wq);
-	nni_mtx_unlock(&s->m);
-
-	return (nni_copyout_int(val, buf, szp, t));
-}
-
-static int
-push0_sock_get_send_fd(void *arg, void *buf, size_t *szp, nni_opt_type t)
-{
-	push0_sock *s = arg;
-	int         rv;
-	int         fd;
-
-	if ((rv = nni_pollable_getfd(&s->writable, &fd)) != 0) {
-		return (rv);
-	}
-	return (nni_copyout_int(fd, buf, szp, t));
-}
-
-static nni_proto_pipe_ops push0_pipe_ops = {
-	.pipe_size  = sizeof(push0_pipe),
-	.pipe_init  = push0_pipe_init,
-	.pipe_fini  = push0_pipe_fini,
-	.pipe_start = push0_pipe_start,
-	.pipe_close = push0_pipe_close,
-	.pipe_stop  = push0_pipe_stop,
-};
-
-static nni_option push0_sock_options[] = {
-	{
-	    .o_name = NNG_OPT_SENDFD,
-	    .o_get  = push0_sock_get_send_fd,
-	},
-	{
-	    .o_name = NNG_OPT_SENDBUF,
-	    .o_get  = push0_get_send_buf_len,
-	    .o_set  = push0_set_send_buf_len,
-	},
-	// terminate list
-	{
-	    .o_name = NULL,
-	},
-};
-
-static nni_proto_sock_ops push0_sock_ops = {
-	.sock_size    = sizeof(push0_sock),
-	.sock_init    = push0_sock_init,
-	.sock_fini    = push0_sock_fini,
-	.sock_open    = push0_sock_open,
-	.sock_close   = push0_sock_close,
-	.sock_options = push0_sock_options,
-	.sock_send    = push0_sock_send,
-	.sock_recv    = push0_sock_recv,
-};
-
-static nni_proto push0_proto = {
-	.proto_version  = NNI_PROTOCOL_VERSION,
-	.proto_self     = { NNI_PROTO_PUSH_V0, "push" },
-	.proto_peer     = { NNI_PROTO_PULL_V0, "pull" },
-	.proto_flags    = NNI_PROTO_FLAG_SND,
-	.proto_pipe_ops = &push0_pipe_ops,
-	.proto_sock_ops = &push0_sock_ops,
-};
-
-static nni_proto push0_proto_raw = {
-	.proto_version  = NNI_PROTOCOL_VERSION,
-	.proto_self     = { NNI_PROTO_PUSH_V0, "push" },
-	.proto_peer     = { NNI_PROTO_PULL_V0, "pull" },
-	.proto_flags    = NNI_PROTO_FLAG_SND | NNI_PROTO_FLAG_RAW,
-	.proto_pipe_ops = &push0_pipe_ops,
-	.proto_sock_ops = &push0_sock_ops,
-};
-
-int
-nng_push0_open(nng_socket *s)
-{
-	return (nni_proto_open(s, &push0_proto));
-}
-
-int
-nng_push0_open_raw(nng_socket *s)
-{
-	return (nni_proto_open(s, &push0_proto_raw));
-}